IMPLEMENTASI METODE SHORTEST-JOB FIRST UNTUK PENJADWALAN PENGGUNAAN LABORATORIUM FISIKA DI SMA 1 PEGAJAHAN
DOI:
https://doi.org/10.46880/mtk.v8i2.1131Kata Kunci:
Penjadwalan, Form Order, Shortest Job FirstAbstrak
Queuing problems can occur in many cases, including in the process of using the physics laboratory by patients. the use of the physics laboratory at SMA Negeri 1 Pegajahan experienced problems such as recording the Order Form which was still done manually, this resulted in frequent data accumulation, loss and even miscommunication. This study aims to make a schedule for the use of the physics laboratory to overcome the queue problem. In this study, the author uses the Shortest Job First (SJF) algorithm, which is a scheduling method by determining that each process in the ready queue will be executed based on the smallest burst time so that the waiting time is short for each process and the average waiting time is also short. Based on the existing problems, it can be concluded that there is a need for a physics laboratory scheduling system using the shortest job first method that can manage and determine the usage schedule according to the duration that has been made.
Referensi
Klikpajak.id, “Masalah Umum yang Biasa Muncul dalam Penggunaan Aplikasi Pajak Online,” https://klikpajak.id/blog/berita-pajak/, 2020. https://klikpajak.id/blog/berita-pajak/masalah-dalam-menggunakan-aplikasi-pajak-online/ (accessed Feb. 22, 2020).
N. Junaedi, “Analisa Kepuasan Mahasiswa Terhadap Sistem Informasi Perpustakaan Universitas Merdeka Madiun Menggunakan Framework Pieces,” Res. Comput. Inf. Syst. Technol. Manag., vol. 1, no. 02, p. 59, 2018, doi: 10.25273/research.v1i02.3364.
Rufialdi, “Rancangan sistem informasi penjualan dan pembelian barang dengan metodologi berorientasi obyek pada toko permata jaya,” vol. 2, no. 2, 2019.
K. Familiar and I. Maftukhah, “PENGARUH KUALITAS PRODUK DAN KUALITAS PELAYANAN TERHADAP LOYALITAS PELANGGAN MELALUI KEPUASAN PELANGGAN,” vol. 4, no. 4, pp. 348–354, 2015.
W. Widiati, “PENGUKURAN TINGKAT KEPUASAN MAHASISWA DALAM PENGGUNAAN SISTEM INFORMASI AKADEMIK MENGGUNAKAN PIECES FRAMEWOR,” vol. XVIII, no. 2, pp. 81–88, 2016.
A. P. Thenata, A. G. Prabawati, U. Atma, J. Yogyakarta, and M. T. Informatika, “Evaluasi Pemanfaatan Teknologi Informasi Penjadwalan Mata Pelajaran Sekolah menggunakan PIECES Framework,” no. 1, pp. 53–63, 2018, doi: 10.21460/jutei.2018.21.97.
A. Supriyatna, “ANALISIS DAN EVALUASI KEPUASAN PENGGUNA SISTEM INFORMASI PERPUSTAKAAN DENGAN MENGGUNAKAN PIECES FRAMEWORK,” vol. XI, no. 1, pp. 43–52, 2015.
Sugiyono, Metode Penelitian dan R&D, 2nd ed. Bandung: ALFABETA, cv., 2015.
Sugiyono, Statistika Untuk Penelitian, 23rd ed. Bandung: 2013, 2013.
R. Nugraha, H. Ambar, and H. Adianto, “Usulan Peningkatan Kualitas Pelayanan Jasa pada Bengkel ‘X’ Berdasarkan Hasil Matrix Importance-Performance Analyisi (Studi kasus di Bengkel AHASS PD. Sumber Motor Karawang),” J. Online Inst. Teknol. Nas., vol. Vol. 01, p. No. 03: 221-231.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2022 Anre Josep Manalu, Darwis Robinson Manalu, Harlen Gilbert Manullang
Artikel ini berlisensi Creative Commons Attribution 4.0 International License.
